Installation Rail Kit Complete With Carbon Filter

Our Installation Rail Kit PFRAILKITB is suitable for all POU water coolers, irrespective if the cooler is ambient & cold or hot & cold.

The PFRAILKITB Consists Of:

• Short length 15 mm copper tubing, to connect to equal tee a 15mm compression double check valve
• An isolation tap and pressure reducing valve set at 2.5 to 3 bar
• A ¼" push-fit reducer and a water block (non return valve and safeguards against flooding. (THIS MUST BE INSTALLED VERTICALLY POINTING DOWNWARDS )
• A filter kit consisting of our re-useable filter housing (to avoid plastic waste)
• Including a carbon block filter candle which fits into the filter housing. The candle can be recycled with household waste

*The mains connection must be to a potable drinking water supply. We recommend that the connection is done by a plumber or an installation trained installer.

Hot water boilers may need a different installation rail kit. If installed in a soft water area, you can use this PFRAILKITB. If however the installation is in a hard water area you may need our BFRAILKITB, which includes a Brita scale removal filter. Our Post Code Scale Checker will tell you if you are installing in a soft or hard water area.