We have introduced a touch free adaptor for our and boiler range, allowing for touch free dispensing of boiling water.

• A simple to install stainless steel accessory that allows boiling water to be dispensed by pushing back on the handle with a cup.
• Adapter for boiler taps AA1000, AA1500, and WA5.
• When you buy an upgraded tap, it can be used on other water boilers (Boiler Complete Tap IN1501)

Installation Rail Kit Complete With Carbon Filter

Our Installation Rail Kit PFRAILKITB is suitable for all POU water coolers, irrespective if the cooler is ambient & cold or hot & cold.

The PFRAILKITB Consists Of:

• Short length 15 mm copper tubing, to connect to equal tee a 15mm compression double check valve
• An isolation tap and pressure reducing valve set at 2.5 to 3 bar
• A ¼" push-fit reducer and a water block (non return valve and safeguards against flooding. (THIS MUST BE INSTALLED VERTICALLY POINTING DOWNWARDS )
• A filter kit consisting of our re-useable filter housing (to avoid plastic waste)
• Including a carbon block filter candle which fits into the filter housing. The candle can be recycled with household waste

*The mains connection must be to a potable drinking water supply. We recommend that the connection is done by a plumber or an installation trained installer.

Hot water boilers may need a different installation rail kit. If installed in a soft water area, you can use this PFRAILKITB. If however the installation is in a hard water area you may need our BFRAILKITB, which includes a Brita scale removal filter. Our Post Code Scale Checker will tell you if you are installing in a soft or hard water area.

Installation Rail Kit Complete With Brita Scale Removal Filter

Our Installation Rail Kit BFRAILKITB is suitable for all hot water boilers in a hard water area. Our Post Code Scale Checker will tell you if you are installing in a soft or hard water area.

The BFRAILKITB Consists Of::

• Short length 15 mm copper tubing, to connect to equal tee a 15mm compression double check valve
• An isolation tap and pressure reducing valve set at 2.5 to 3 bar
• A¼" push-fit reducer and a water block (non return valve and safeguards against flooding. (THIS MUST BE INSTALLED VERTICALLY POINTING DOWNWARDS )
• A Brita C150 scale filter and Brita C 1/4"

For Boilers In Soft Water Areas:
In soft water areas there would be no need for an expensive scale removal filter You can use our standard installation rail kit. The PFRAILKITB with a carbon block filter candle.

*The Mains connection must be to a potable drinking water supply. We recommend that the connection is done by a plumber or an installation trained installer